C Series
Tsurumi C Series Cutter Pump™ is solids handling non-clog submersible pump with a unique tungsten carbide tipped single or multi-vane impeller & high chrome serrated wear plate for shredding of solids.
B_500x500
B Series
Solids handling, non-clog submersible pump designed for raw sewage and wastewater.
BK_500x500
BK Series
Solids handling non-clog submersible pump featuring a standard cooling jacket at lo water levels without overheating.
bz-sewage-pumps
BZ Series
Solids handing non-clog submersible pump with unique channel impeller designed for raw sewage in wastewater
MG Series
Foreign matter is finely ground by the built-in grinder mechanism
U
U Series
Semi-vortex, cast iron impeller passes solids and stringy materials without clogging
PU
PU Series
Multi-purpose pump with a semi-vortex impeller to handle solids. Medium head / high volume pump.
__(1).jpg?1251)
UT / UTZ Series
Prevents clogging by solids and fibrous materials through the use of a vortex impeller and wide passage
UZ
UZ Series
Vortex impeller and wide interior pump casing to handle suspended solids
| MQ SERIES | C SERIES | B SERIES | BK SERIES | BZ SERIES | MG SERIES | U SERIES | PU SERIES | UT / UTZ SERIES | UZ SERIES |
| 5 types of impellers (Open Channel, Chopper, Vortex, Grinder, and High Head) | Built-in thermal protector prevents motor failure due to overloading or accidental run-dry conditions. | Anti-wicking block prevents water incursion to the stator if cable is accidentally damaged | Anti-wicking block prevents water incursion to the stator if cable is accidentally damaged | Built-in motor protection for surge and run-dry conditions | High chromium grinder mechanism | Cast iron construction | 32ft. power cord | Dual silicon carbide faced seals eliminate spring failure due to corrosion or abrasion | |
| AISI 431 drive shaft (AISI 329 on request) | Handles residential, commercial, and indiustrial sewage | Available with class E, B, F insulation to minimize operation costs. Double inside mechanical seals with Sic-Sic faces operate in a separate oil-filled chamber. | Available from 30-50HP in Free-tanding and Guide Rail designs. | Class F insulation minimizes operating costs | Ideal for small scale sewage systems | Circle Thermal Protectors (CTP) provide protection due to excessive heat build up, over current, or electrical/mechanical failure | Available in Automatic Operation (PUA) / Auto Alternating (PUW) | Available in Automatic Operation – Automatic version equipped with floats. (50UTZ2.4S and 50UTZ2.75S) | High tensile stainless steel shaft to handle full load operation |
| ANSI discharge size from 2″ to 16″ | High head capabilities available on certain models | Double-shielded, permanently lubricated high-temp C3 ball bearings rated for B-10 life of 60,000 hours | Double inside mechanical seals with Sic-Sic faces operate in a separate oil-filled chamber. | Passes 3″ diameter solids without clogging | Semi-vortex high chrome impeller | Class F insulation | Ball type air Relief valve | Economical – the UT/UTZ Series is an economical version of the Tsurumi U Series, semi-vortex submersible pumps. It is designed for a wide range of applications. | Oil lifter to maintain seal face lubrication when oil falls below rated volume |
| Cast iron structure (stainless steel on request) | Ideal for poultry, dairy. hog, and fish waste processing | Enclosed multi-vane impellers (7.5 hp – 30 hp models) | Double-shielded, permanently lubricated high-temp C3 ball bearings rated for B-10 life of 60,000 hours | Single vane, cast iron impeller | Copper wound motor, air-filled and rated for continuous duty | Built in motor protection | Large Diameter Passage – The pump has a large passage that makes it ideal fr liquid containing various solids. | Recessed vortex impeller | |
| Class H electric motor from 4 HP to 215 HP, efficiency class IE3 | Serrated suction cover is field replaceable/adjustable | Field adjustable/replaceable wear plates | Field adjustable/replaceable wear plates | Semi-vortex cast iron impellers | Continuous duty air filled copper wound highly efficient motor. | Wide pump casing | |||
| Explosion-proof (FM Approved Design) | Single and multi-vane cast iron impellers with tungsten carbide tips | Highly efficient air filled motors for continuous duty operation | Highly efficient air filled motors for continuous duty operation | Watertight casing | Corrosion Resistant Stainless Steel Motor Casing | ||||
| Leakage detection system in seal chamber (standard) and motor (on request) | Suitable for problem sump applications with unpredictable solids incursion found in schools, hospitals, industrial laundries | Semi-open, single vane impellers (1 hp – 5 hp models) | Water jacket ensures perfect water cooling by circulating drainage around the motor housing (available on 30 hp or above) | Dual inside mechanical with Silicon Carbide vs. Ceramic bottom faces. | |||||
| Long life bearings (100,000 hours) | Permanently lubricated sealed ball bearings rated B-10 60,000 hours. | ||||||||
| Operating temperature – pump media up to 104°F | Solids handling semi-vortex impeller | ||||||||
| PATENTED closed loop cooling jacket with internal recirculation | Watertight Cable Entrance with Anti-wicking block. | ||||||||
| Thermal protection sensors incorporated into the stator | |||||||||
| Two silicon carbide mechanical seals in large oil chamber | |||||||||
| WET or DRY Pit configurations available | |||||||||
